[. . . ] If you wish to dispose of this product and the battery, please do so in accordance with applicable Products national legislation or other rules in your country and municipality. By disposing of this product correctly, you will help to conserve natural resources and will help prevent potential negative effects on the environment and human health. Notice: Battery The sign Pb below the symbol for batteries indicates that this battery contains lead. DO NOT install any unit or wire any cable in a location where; ­ it may obstruct the steering wheel and gearshift lever operations. [. . . ] When connected with the interface adapter This mode will be canceled if no operations are done for about 5 seconds. When operating through the CD changer jack, make sure <iPod> is selected for the external input setting. While playing an MP3 disc, you can select and start playing a track in the disc using the Lists: <Disc List> (select the current disc) = <Folder List> = <File List> then start playing a track you want. It is recommended to use a JVC MP3-compatible CD changer with your unit. Each time you hold the button, you can display the other list of the remaining discs. Each List can also be accessed through <AV Menu> = <List> = <Disc List> = <Folder List> = <File List>. When one of the playback modes is selected, the corresponding indicator lights up on the source information screen. Randomly plays all tracks of current folder, then tracks of next folders. You can use the following buttons on the remote controller to operate the CD changer. Manual Search: Hold either or until "Manual Search" appears on the display, then touch it repeatedly. * The TEXT indicator lights up while tuning in to an ensemble that supports Dynamic Label Segment (DLS). " ­15 to +15; Initial 0 Bright: Adjust if the picture is too bright or too dark. Tint: Adjust the tint if the human skin color is unnatural (available only when the source is "AV Input" and the incoming signal is NTSC). Regular: For 4:3 original pictures Select the indication language shown on the monitor. english , Español , Français , Deutsch , Italiano , Nederlands , Svenska , Dansk , cc , Português · The characters you can enter for assigning the titles also change according to the language selected, [65] On: Displays the clock time while playing back a video source. Auto: Activates auto clock adjustment using the clock time (CT) data from a Radio Data System station. Select the monitor type to watch a wide screen picture on the external monitor. Refer to the illustrations on the left to see how the pictures are shown on the monitor. Select playback file type when a disc/USB contains different types of files. You can store this setting separately for each source --"Disc" and "USB. Once you have played back a file with which the Registration Code recorded, this unit's Registration Code is overwritten for copyright protection. ( also page 66) PCM Only: Select this when connecting an amplifier or a decoder incompatible with Dolby Digital or MPEG Audio, or when connecting to a recording device. [. . . ] Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Sound signals emitted through the rear terminals ENGLISH When playing multi-channel encoded disc, multi-channel signals are downmixed. To reproduce the multi-channel sounds such as Dolby Digital and MPEG Audio, connect an amplifier or a decoder compatible with these multi-channel sources to this terminal, and set <D. With MPEG Audio Audio CD, Video CD DivX/MPEG with Dolby Digital with MPEG Audio MP3/WMA WAV * Digital signals may be emitted at 20 or 24 bits (at their original bit rate) through the DIGITAL OUT terminal if the discs are not copy-protected. [. . . ]